Wells Remote Systems Refrigeration Specifications

3 types of remote systems are available for any model. Choose any model RCP, HRCP or Frost Top from pages 42 through 47 then choose the type of remote system that best meets your application. When ordering add RC or PCL or NC to the end of the standard model number. Each type system has different pricing. Contact factory for prices.

RC Series – Remote Condenser/Compressor housing is included but is not connected to Unit.

Without: Quick Disconnects and Pre-charged Refrigeration Lines

Includes: Cold pan is shipped unattached to the compressor base assembly. The refrigeration lines protrude out the bottom, have a vacuum pulled and are filled with nitrogen, crimped then soldered shut. Compressor housing that is normally shipped attached to the pan instead ships loose in the crate and attached to a galvanized base. There is 10’ of refrigeration copper tubing provided and is connected to the compressor on one end, have a vacuum pulled, and are filled with nitrogen, crimped and soldered shut. No refrigerant is provided. It would be up to the installer to mount the base assembly within the 10’ line length to be able to connect to the pan. On/off switch and thermostat are mounted to the compressor base along with sight glass and TXV valve. HRCP family pans in this series are shipped with the control panel temporarily attached to the bottom of the pan on a 3’ lead.

PCL Series – Remote Condenser/Compressor housing included but is not connected to Unit.

INCLUDES Quick Disconnects and Pre-charged Refrigeration Lines.

Includes: Cold pan is shipped unattached to the compressor base assembly. The refrigeration lines protrude out the bottom and have a quick con- nect attached to the ends, they have been pre-charged with the proper refrigerant. Compressor housing that is normally shipped attached to the pan instead ships loose in the crate and attached to a galvanized base. There is 10’ of refrigeration copper tubing provided and is connected to the compressor on one end, the other end has a quick connect and the lines have been pre-charged with refrigerant. It would be up to the installer to mount the base assembly within the 10’ line length to be able to connect to the pan. On/off switch and thermostat are mounted to the compres- sor base along with sight glass and TXV valve. HRCP family pans in this series are shipped with the control panel temporarily attached to the bottom of the pan on a 3’ lead.

NC Series – No Condenser/Compressor”-No Condenser/Compressor housing, this unit is to “tie into” another Refrigeration system.

Unit comes with Refrigeration lines “stubbed” out the bottom of the Unit, vacuum is pulled, lines charged with nitrogen, crimped then soldered shut. No refrigerant is provided. HRCP family pans in this series are shipped with the control panel temporarily attached to the bottom of the pan on a 3’ lead.

Now includes: Solenoid, electronic thermostat control (TTC) and on/off switch. The expansion valve is available as an option/accessory for $265 list. Contact factory for correct expansion valve. Wiring diagram from Thermostat to solenoid valve(s).