5 Available Models:

  • MDW100
  • MDW200
  • MDW300
  • MDW400
  • MDW500
Wells patent pending dry well units are designed to efficiently hold heated foods at safe serving temperatures with no need for water or drains and are available in 1-5 well versions. Each dry well is designed to hold [1] standard full-size steam table pan up to six [6] inches (152 mm) deep or equivalent fractional pans per well.

Find a Dealer




Wells MDW dry well units are constructed in the U.S.A. with a corrosion-resistant type 430 stainless steel body. The units include factory-attached infinite controls for each individual well. The one [1] and two [2] well models are single [1] phase, but can be converted to three [3] phase. The three [3], four [4], and five [5] well models are three [3] phase and can be field converted to single [1] phase. All units come setup to hard-wire. The standard units use 0.61 kW per well at 208 V and 0.8 kW per well at 240 V. The units are insulated on front, back, sides, and bottom. Units are designed to be top-mounted.

  • ¬†Utilizes tubular heating elements and stainless steel fan meaning no need for water or drains
  • Modules use less energy translating to operational cost savings
  • Each well uses an individual control knob to allow independent control of each section on multiple-well units
  • Dry design allows full top-side access to components after installation
  • Accommodates one [1] standard full-size steam table pan up to six [6] inches (152mm) deep pan or equivalent fractional pans per well
  • Included Wellslok system securely fastens to metal counters up to 0.25-inch (6 mm) thick
  • Built-in high limit switch prevents overheating

Spec Sheet

MDW100 Installation Sheet

MDW200 Installation Sheet

MDW300 Installation Sheet

MDW400 Installation Sheet

MDW500 Installation Sheet

MDW Cleaning Guide

Wellslok Extension Kit

Dry Well Advantages

Owners Manual

Dry Well Sell Sheet